Home › Fit chart
Robot mower blade fit chart
Find your mower, then open the pack listed for it. All fit information comes from the seller’s Amazon listings (checked October 28, 2026) and is listed to fit, not guaranteed.
Fit check before you order. Compatibility on this site is the seller’s own list, taken from the Amazon listing. It is not an approval from any mower maker. Check your mower model, the length, center hole and thickness of your current blade, and the screw it uses. Husqvarna recommends using only original Husqvarna blades and screws; other makers have their own guidance. If your mower is not listed, measure first or ask us.
| Brand | Models listed | Pack | Notes |
|---|---|---|---|
| Husqvarna Automower | 220AC to 450X (listing text) | Extra-Long; Titanium-Coated Regular | Husqvarna recommends original blades and screws. Replace screws each change. |
| Gardena | R38Li to Sileno series (listing text) | Extra-Long; Titanium-Coated Regular | Check blade length against your original. |
| Segway Navimow | i105N to H3000N, incl. H800N-VF, H1500N-VF, H3000N-VF (listing text) | Extra-Long; Titanium-Coated Regular | Newer series such as X, i2 and H2 are not named in the listings. Measure first. |
| Yard Force | Single-disc models; SC600, SC600 Eco, SC900 shown in listing picture | Extra-Long; Titanium-Coated Regular | Check your model. |
| Flymo | 1200R (listing text) | Extra-Long; Titanium-Coated Regular | Check your model. |
| Anthbot | Anthbot robotic mowers (models not itemized in the listing) | Anthbot 30-Pack | Slightly larger center hole than the other packs. |
| Mammotion | LUBA AWD 1000–5000; LUBA 2 AWD 3000–10000; YUKA 600–1500 | Mammotion Luba & Yuka 30-Pack | Dual-hole blades; screws and plastic washers included. |
| Ecovacs Goat A3000 and any two-disc mower | Not compatible per the Extra-Long listing | None of these packs | Do not order. |
Open a pack
- Extra-Long Stainless Steel Robot Mower Blades, 30-Pack with Screws
- Titanium-Coated Stainless Steel Robot Mower Blades (Regular Size), 30-Pack with Screws
- Robot Mower Blades for Anthbot, 30-Pack Stainless Steel with Screws
- Robot Mower Blades for Mammotion Luba & Yuka, 30-Pack with Screws and Washers
How to measure your blade
- Power the mower off and wear cut-resistant gloves.
- Remove one blade and its screw.
- Measure length and width in millimeters, count the holes, and note the screw thread and length.
- Compare with the size details on the pack’s page. Regular blades in the listing pictures are 35 mm by 18 mm; extra-long are 43 mm by 18 mm; the Mammotion blade is 36 mm by 19.5 mm.
Not on the list? Contact us at 1-800-200-5290 before ordering.